Home  ›  Preparation of the Continuous Carbon Grid for Cryo em

Preparation of the Continuous Carbon Grid for Cryo em

Written By Thursday, October 13, 2022 Add Comment Edit
  • Journal List
  • Front Mol Biosci
  • v.5; 2018
  • PMC6090150

Front Mol Biosci. 2018; 5: 74.

Cryo-EM Grid Preparation of Membrane Protein Samples for Single Particle Analysis

Germán G. Sgro

1Departamento de Bioquímica, Instituto de Química, Universidade de São Paulo, São Paulo, Brazil

Tiago R. D. Costa

2Department of Life Sciences, Imperial College London, MRC Centre for Molecular Microbiology and Infection, London, United Kingdom

Received 2018 Mar 21; Accepted 2018 Jul 10.

Abstract

Recent advances in cryo-electron microscopy (cryo-EM) have made it possible to solve structures of biological macromolecules at near atomic resolution. Development of more stable microscopes, improved direct electron detectors and faster software for image processing has enabled structural solution of not only large macromolecular (megadalton range) complexes but also small (~60 kDa) proteins. As a result of the widespread use of the technique, we have also witnessed new developments of techniques for cryo-EM grid preparation of membrane protein samples. This includes new types of solubilization strategies that better stabilize these protein complexes and the development of new grid supports with proven efficacy in reducing the motion of the molecules during electron beam exposure. Here, we discuss the practicalities and recent challenges of membrane protein sample preparation and vitrification, as well as grid support and foil treatment in the context of the structure determination of protein complexes by single particle cryo-EM.

Keywords: protein purification, membrane protein complex, vitrification, cryo-EM, single particle analysis

Introduction

During the course of the past 10 years, spectacular advances have been made in the ability to solve macromolecular structures using cryo-EM, culminating in the 2017 Nobel Prize in Chemistry awarded to Jacques Dubochet, Joachim Frank and Richard Henderson for developing the technique and applying it to high-resolution structure determination of biomolecules in solution (Cheng et al., 2017). One significant development that made the recent breakthroughs possible was the introduction of direct electron detectors with superior DQE (Detective Quantum Efficiency) (Milazzo et al., 2011; Bammes et al., 2012), which can also operate at higher frame rates allowing recording of movies instead of single images. These features permit correction of the specimen movement caused by the electron radiation and temperature-changes induced drifts during the subsequent image processing steps (frame alignment) (Glaeser et al., 2011; Brilot et al., 2012; Li et al., 2013; Zheng et al., 2017).

In spite of these advances, it is still difficult to routinely obtain high-resolution structures of single proteins or their complexes. Many aspects of protein sample preparation are still poorly understood, and therefore difficult to master. Here, we present an overview of the recent developments in protein preparation methods for cryo-EM, to facilitate the understanding of protein behavior and assist the user during this process.

Protein sample preparation and stabilization

Before freezing the specimen on the EM grid, it is important to evaluate several biochemical and biophysical aspects of the protein sample, such as composition, purity, homogeneity, stability, and biochemical activity (Figure ​ 1A). Prior knowledge of the protein molecular weight and oligomeric state(s), and buffer composition (salt concentration, pH, co-factors, cryo-protectants and other additives) in which the protein is stable can remarkably facilitate cryo-EM grid preparation (Figure ​ 1A). Additionally, evaluation of sample homogeneity by negative staining electron microscopy (NS-EM) before cryo-EM grid preparation will help not only to validate that the correct purification protocol has been followed, but will also ensure that no contaminants or degradation products are present in the protein sample. Such contaminants can interfere significantly with the subsequent computational analyses of the particle images.

An external file that holds a picture, illustration, etc. Object name is fmolb-05-00074-g0001.jpg

Generic protein purification workflow and different membrane protein stabilization strategies using artificial membranes. (A) Cytoplasmic or membrane proteins are initially expressed in liquid or solid cultures, and pellets are stored after harvesting by centrifugation. Different physical or chemical cell disruption methods are utilized for releasing cytoplasmic proteins into solution or to obtain cell membrane extracts. Impure cytoplasmic proteins or solubilized cell membranes containing the protein of interest are purified by combination of different fast protein liquid chromatography (FPLC) methods. After protein stability, integrity and activity is verified by various biophysical techniques. The final sample concentration and buffer composition are adjusted before EM grid preparation. (B) Protein transmembrane domains are protected by the hydrophobic cell membrane phospholipid acyl chains. Micelles are spherical vesicles in which the detergent hydrophobic chains face inward and the hydrophilic polar heads face outward. Bicelles are obtained by a mixture of lipids and short chain detergents. The lipids will interact with the protein to form a lipid bilayer and the detergent will form the rim of the bicelle. Micelles will form after the solubilization of the membrane protein by detergents. SMALP (styrene-maleic acid lipid particles) are polymeric nanoparticles that protect the acyl chain of the lipid bilayer. Nanodiscs are lipid bilayers stabilized by wrapping a belt of amphipathic helix-rich membrane scaffold proteins (MSPs) around the detergent-solubilized membrane proteins. Amphipol polymers wrap around the hydrophobic patches of the membrane protein to form a stable complex in solution. Liposomes are artificial spherical lipid membranes where membrane proteins can assemble.

Membrane protein sample preparation

It is estimated that 20–30% of the genes in almost all known (eubacterial, archaeal and eukaryotic) genomes encode membrane proteins (Wallin and Heijne, 1998; Krogh et al., 2001). Membrane proteins play important roles in cells and organelles, affecting the function of tissues or the behavior of organisms (Alberts et al., 2014). Structural information is indispensable for understanding the biological mechanisms in which these proteins play critical roles. Yet, the determination of three-dimensional structures of membrane proteins represents the most challenging cases of all proteins, mainly due to seemingly insurmountable difficulties during sample preparation.

The main challenge in membrane protein or membrane protein complex biochemistry is, by far, the determination and optimization of the chemical conditions capable of solubilizing the protein from the membrane and stabilizing its native state in solution. Unfortunately, a method that works for one particular protein may not be suitable for another; therefore there is no "golden rule" to efficiently stabilize any membrane protein, and an empirical trial-and-error process is currently the best way to proceed. In any case, understanding the physicochemical properties and pros and cons associated with the different methods can be a useful starting point for deciding which strategy may work best for a particular case.

For many years, detergents have conventionally been used to solubilize membrane proteins or protein complexes, enabling their stable handling in solution (Seddon et al., 2004; Privé, 2007; Paulsen et al., 2015). Detergents solubilize membrane proteins by mimicking the natural lipid bilayer environment of membranes, and can be classified according to their structure into four major categories; Ionic, Non-ionic, Zwitterionic detergents and bile acid salts; (Seddon et al., 2004; Figure ​ 1B). While using detergents, some aspects have to be considered during the process. Proteins must be handled in solutions containing detergent above the critical micelle concentration (CMC) in order to minimize denaturation. It should be kept in mind that protein solubilization does not always maintain their native structure and stability; thus, a detergent that is used for extraction from the membranes may not be compatible with subsequent stabilization steps and/or biochemical characterization of the solubilized protein.

Recently, a new class of solubilizing agents has been designed, consisting of a mixed copolymer with a hydrophilic backbone and hydrophobic side chains, known as amphipols (Popot et al., 2011). These molecules wrap around the hydrophobic portion of the protein and expose their hydrophilic components to the aqueous environment (Figure ​ 1B). Amphipols have significant advantages over traditional detergents. For example, as they are completely associated with the protein, there is little or no free polymer in solution; thus minimizing problems related to phase separation encountered in crystallization, increased viscosity in nuclear magnetic resonance spectroscopy (NMR) experiments, or diminished contrast in cryo-EM images. Amphipols have successfully been used in structural studies of many membrane proteins demonstrating their efficacy as solubilizing agents (Flötenmeyer et al., 2007; Althoff et al., 2011; Bai et al., 2015; Mazhab-Jafari et al., 2016; Wilkes et al., 2017).

Although membrane proteins solubilized using these agents show significant stability and solubility, they are still confined to an environment very different from the natural lipidic membrane. It has been broadly shown that membrane composition is critical for the correct functioning of membrane-associated proteins, by modulating their structure and stability via specific lipid-protein interactions (Zhou and Cross, 2013; Saliba et al., 2015). A solution to overcome these drawbacks is reconstructing the protein into artificial lipid membranes, like liposomes (Rigaud and Lévy, 2003; Figure ​ 1B). Liposomes have provided good results not only in the determination of membrane protein structures by cryo-EM (Tilley et al., 2005; Wang and Sigworth, 2009; Jensen et al., 2016; Kudryashev et al., 2016), but are also a useful tool for analyzing these proteins by NMR (Warschawski et al., 2011; Dürr et al., 2012).

Because of the intrinsic difficulties of purifying and manipulating liposomes, in recent years the most commonly used lipid bilayer environment-based tool is the nanodisc (Denisov and Sligar, 2016, 2017). Nanodiscs are composed of a region of the membrane lipid bilayer wrapped by amphipathic helix-rich membrane scaffold proteins (MSPs) (Bayburt et al., 2002), resulting in a disc-shaped stable particle that contains the target protein or protein complex (Figure ​ 1B). The strong interactions between MSPs and membrane lipids and the very low solubility of the latter in water permits the self-assembly of nanodiscs (Denisov and Sligar, 2017). Although this technology has successfully been used in membrane protein structure determination by different methodologies, cryo-EM may be the one where the advantages of nanodiscs usage is most effectively utilized (Efremov et al., 2015; Gatsogiannis et al., 2016; Kedrov et al., 2016), sometimes improving the resolution and quality of the structures obtained in other studies (Gao et al., 2016; Shen et al., 2016).

Another detergent-free solubilizing tool is styrene–maleic acid copolymers (SMAs) (Dörr et al., 2016). The most striking feature of these amphipathic molecules is their ability to solubilize lipid bilayers directly from cells as polymer-surrounded (instead of MSP-surrounded) nanodiscs (Long et al., 2013; Figure ​ 1B). To date, this technique has been used in several biochemical and biophysical reports (Orwick et al., 2012; Dörr et al., 2014; Lee et al., 2016), but in only a few structural studies of membrane proteins (Postis et al., 2015; Parmar et al., 2018).

Cryo-EM grid preparation

Cryogenic sample-grid preparation allows fixing biological samples by rapidly transferring and cooling them in liquid ethane (−188°C). Under these conditions, ice crystals are unable to form, thus preserving the specimen integrity. Ideally, cryo-EM samples should be contained in a thin layer of vitreous ice, with a thickness as close as possible to the dimensions of the particles. This minimizes multiple scattering events and maximizes sample contrast in the microscope. In practice, approximately 3 μL of sample is deposited on the cryo-EM grid (Figure ​ 2A) to promote its absorption followed by blotting with filter paper to remove the excess of liquid and create a very thin layer of protein suspension on the grid, which is then rapidly frozen (plunge freezing) in liquid ethane (Figure ​ 2B). Unfortunately, optimal ice thickness is difficult to reproduce from one grid to another due to the uneven surface properties of the blotting paper. In order to solve this limitation, alternative blotting-free methods that ensure a more reliable and reproducible grids preparation have recently been developed. The same newly developed automated systems have also reduced the protein sample volume required for each grid preparation from the microliter to the nano- or even femtoliter range. Some of the new devices include the "Spotiton" robot that uses an inkjet dispenser to deposit 2–16 nL droplets onto self-blotting grids (Jain et al., 2012; Razinkov et al., 2016; Noble et al., 2018), a spray-plunging system that delivers droplets directly onto the EM grid (Feng et al., 2017), a microcapillary-based system that applies and spread the sample on the grid (Arnold et al., 2017), and a system that uses surface acoustic waves to deliver 30–200 fL droplets from a microfluidic chip to the EM grid (Ashtiani et al., 2018).

An external file that holds a picture, illustration, etc. Object name is fmolb-05-00074-g0002.jpg

Different designs of a TEM (transmission electron microscopy) grid and semi-automated method for specimen vitrification. (A) Examples of a TEM grid with irregular hole size foil (Lacey) or with defined hole diameter and spacing (Quantifoil). (B) An automated plunge-freezing device is commonly used for specimen vitrification. Sample is applied with a pipette at the surface of the cryo-EM grid and sample excess is removed by blotting with filter paper, followed by immediate freezing in liquid ethane. The specimen can be frozen on a grid with (i) or without (ii) a thin continuous film made of different materials. TEM grids with different grid mesh, foil and grid support materials can be used during specimen freezing.

It is often the case that when applied to an EM grid (Figure ​ 2A) the protein complex aggregates and/or falls apart. This may occur because the specimen is exposed to physical conditions different to the ones inside the cell or the optimized purification buffer (Figure ​ 2B). Surfaces such as amorphous carbon, metal support structure, filter paper and air-water interface affect the way particles behave and are distributed on the grid (Figure ​ 2B). Notably, if we consider a 3-mm diameter grid and an 800-Å-thick ice layer, the surface area to volume ratio in this layer is 4 orders of magnitude greater than in the original 3-μL drop of solution containing the sample, adding even more complexity to the process. Efforts are being made to understand and surpass these detrimental effects on biological samples (Glaeser and Han, 2017). Together, all of these factors can lead to a failure of grid preparation, or an overall lack of reproducibility from grid to grid.

Often, the protein concentration on the grid does not match the protein concentration in solution due to surface adhesion effects. Particle density can be higher than expected if they tend to absorb more to the surface, and lower if they are repelled from the surface or absorbed to the support structures. Taking into account that we need 5–10 times more sample concentration for cryo-EM than for NS-EM, a very helpful table that provides an estimation of the number of particles expected in the thin layer of vitreous ice on holey grids for a given concentration of sized macromolecular complexes can be found in the 2016 review by Vinothkumar and Henderson (2016).

Several modifications and alternatives have been tested to overcome limitations in particle stability, distribution and (preferential) orientation during cryo-EM grid preparation. In cases of dynamic complexes, glycerol gradient centrifugation coupled to chemical cross-linking (GraFix; Kastner et al., 2008) has been proven to increase sample stability. The addition of detergents below its CMC (Lyumkis et al., 2013; Fernandez-Leiro et al., 2015), the use of affinity grids or antibodies (Kelly et al., 2008; Earl et al., 2017), chemically oxidized carbon films (Llaguno et al., 2014), PEGylation of gold grids (Meyerson et al., 2014) and the use of a "DNA cage" that surrounds and protects proteins (Martin et al., 2016a) are some of the most successful approaches described to improve stability, distribution and orientation of particles on the cryo-EM grid. In cases where only small sample volumes can be obtained, direct blotting from native gels to EM grids has also been proven successful (Knispel et al., 2012). It is worth mentioning specimen tilting as a method of overcoming particle preferential orientation, a concept that is not new and that recently has been explored again with good results (Naydenova and Russo, 2017; Tan et al., 2017).

Supports and foils

The grid is a 3-mm diameter piece of metal mesh that serves as the major support for the sample. Grids are specified in units of metal lines per inch; thus grids of mesh 200 or 400 contain 200 or 400 lines per inch, respectively (Figure ​ 2A). The foil is the thin layer directly located across and on top of the grid support that contains holes or some other sophisticated geometry in it (Figure ​ 2B). A regular repeating array of circular holes (Quantifoil or C-Flat grids) are usually the first type of grids chosen because they facilitate automated data collection. Alternatively, grids with irregular geometry such as Lacey carbon can also be used (Figure ​ 2A).

Grid supports and foils (Figure ​ 2B) can be made of different materials. For example, metals (alone or in alloys) are used for making the grid supports, i.e., copper, nickel, molybdenum, silicon, titanium, aluminum and gold (Vonck, 2000; Yoshioka et al., 2010; Russo and Passmore, 2014b). Copper is the most common because it is cheap and a good conductor (an important feature to avoid detrimental sample charging). In the case of the foil, by far the most common material is amorphous carbon (Figure ​ 2B) because it is inert, relatively electron transparent, electrically (somewhat) and thermally conductive, and is easily manufactured into foils. Many other materials (TiSi, SiN, SiO2, SiC) have also been considered and tested over the years for different reasons, but only a few of them have given good results and only in particular cases (Typke et al., 2004; Rhinow and Kühlbrandt, 2008; Yoshioka et al., 2010). Amorphous carbon foils have their own limitations when used in conjunction with a different grid support material. Two main reasons have encouraged researchers to test different materials both in grid supports and foils in order to overcome the drawbacks of using two-material grids. The first one is derived from differential thermal contraction. When a traditional (copper/carbon or gold/carbon) grid is cooled to liquid N2 temperatures (−196°C), the metal support shrinks more than the carbon foil causing the wrinkling of the latter ("cryo-crinkling") and subsequent loss of tension (Glaeser, 1992; Booy and Pawley, 1993). The coefficient of thermal expansion for copper is 16.6 × 10−6 K and for carbon is 0.5–8.8 × 10−6 K (Glaeser, 1992; Booy and Pawley, 1993). Cryo-crinkling promotes a movement of 200–400 Å perpendicular to the plane of the support (Russo and Passmore, 2014b) as well as lateral movements in the horizontal plane (Brilot et al., 2012) during electron irradiation. By making the thermal expansion coefficient of the grid support closer to that of the foil (e.g., using titanium, molybdenum or tungsten instead of copper or gold), one can minimize this effect (Booy and Pawley, 1993; Fujiyoshi, 1998; Vonck, 2000). The second challenge arises from the electrical properties of carbon, as its conductivity is quite poor and it behaves as a semi-conductor (Larson et al., 2011). As with other semi-conductors, conductivity decreases (or resistivity increases) as temperature decreases. This promotes build-up of charges on the foil and consequent radiation-induced movement that causes loss of resolution in electron micrographs (Russo and Passmore, 2016a; Russo and Henderson, 2018). In the last few years, gold has become an excellent alternative for overcoming these issues (Russo and Passmore, 2014b, 2016b). First, since the entire grid structure (both support and foil) is made of the same material, it shrinks uniformly and the flatness/rigidity of the foil is maintained after cryo-plunging. Second, resistivity in thin gold films is several orders of magnitude lower than for thin carbon films, and it is more conductive as temperature decreases (normal behavior for metals), helping to reduce accumulation of charges on the supports (Russo and Passmore, 2016b). The improved stability of the support reduces particle movement during image collection by more than an order of magnitude, leading to improved image quality.

Foil treatments

The supporting surfaces are often hydrophobic, which prevents the efficient spreading of aqueous solution onto grids. In order to reduce hydrophobicity, they are treated with low energy plasmas, which are created by ionization of a low-pressured gas aka "glow discharge". Air is the most used gas mixture, but there are also plasma chambers that use defined mixtures of gases including oxygen, hydrogen and argon, or amylamine-enriched atmosphere. Air provides the grid with a negative charge, while amylamine yields a positive charge, both being beneficial in a case-dependent manner. The ions also interact with the surface removing certain contaminations. A common problem in cryo-EM protein sample preparation is incomplete wetting of the grid surface, which can be solved by adjusting the plasma and conditions to achieve a more uniform spreading of the solution on the grid (Figure ​ 2B). Other foil treatments tested in the past include UV (Burgess et al., 2004) and electron (Miyazawa et al., 1999) radiation.

Creating conditions that promote the partition of protein particles into the holes of the foil is sometimes a significant challenge. One possible strategy is to add another surface (a continuous film) on top of the foil in order to provide an extra physical support for the particles to adsorb to. In practice, additional films may also help to overcome limitations such as low protein concentration, particle distribution in the grid holes, preferential orientation and air-water interface issues (Figure ​ 2B). As shown in the literature, the most common type of film is a very thin layer of amorphous carbon (10–100 Å), which is relatively simple to make and use in the laboratory (Bernal and Stock, 2004; Passmore and Russo, 2016).

Unfortunately, amorphous carbon films contribute substantially to background signal, which is less of an issue when studying large protein complexes, but becomes significant for 150-kDa (or smaller) complexes. In these cases, an alternative is to use a different type of film. Graphene (Pantelic et al., 2011), for example, is an excellent support material because it is a 1-atom thick (0.34 nm) hexagonal lattice of carbon atoms with extremely good conductivity properties (Heersche et al., 2007; Chen et al., 2008) and mechanical strength (Lee et al., 2008; Wang et al., 2009; Figure ​ 2B). It is also effectively invisible at the resolutions reached in electron microscopy (Meyer et al., 2007). Hence, although graphene supports are difficult to make and transfer (Li et al., 2009; Regan et al., 2010; Pantelic et al., 2011), they have more ideal properties that potentially may reduce the effects of charging and improve image quality. Graphene is naturally hydrophobic and must be rendered hydrophilic to allow the wetting of the surface. A number of methods have been recently developed to overcome this limitation. Partial hydrogenation of the graphene surface has been used to control protein adsorption to the surface (Russo and Passmore, 2014a). Also, graphene oxide (Pantelic et al., 2010) has gained popularity (Bokori-Brown et al., 2016; Boland et al., 2017), because it is more easily produced and deposited on grids (Martin et al., 2016b), and because it is hydrophilic by nature thus obviating the plasma treatment step (Figure ​ 2B). Still, reproducibility and coverage using graphene oxide is difficult and it can contribute to background noise.

Conclusions

The practicalities, challenges and examples described above, along with numerous other studies, illustrate how intricate and difficult protein sample preparation can be. Determination of high-resolution structures by cryo-EM is a rapidly growing field, in particular with the recent developments in detection and recording, user-friendly microscopes and better preforming software. In this context, protein sample preparation still remains a trial and error process, where different approaches have to be explored in order to maximize the chances for success.

The ultimate goal is to move from trial-and-error processes to more controlled and reproducible protein sample preparation protocols. Better grid supports will reduce specimen movement during data collection, diminish build-up of charge and help control the orientation and distribution of particles within the ice layer.

We anticipate future advances such as the design and production of other automated vitrification devices based on different technologies, the development of rapid ice thickness screening protocols, the minimization of radiation-induced motion and charging, and the exploitation of more tunable interacting surfaces. Additionally, we will witness in the near future an increased investment in the development of new solubilization methods for membrane protein sample preparation, improved electron microscope detectors, recording hardware and data processing software. These new developments will allow us to reach the theoretical resolution limit of this powerful technique sooner than expected.

Author contributions

GS wrote the manuscript and prepared the figures. TC edited the manuscript and figures, and supervised the work. Both authors approved the final version of the manuscript.

Conflict of interest statement

The authors declare that the research was conducted in the absence of any commercial or financial relationships that could be construed as a potential conflict of interest.

Acknowledgments

We would like to thank Chuck Farah and Natasha Lukoyanova for critical reading of the manuscript.

Footnotes

Funding. This work was supported by institutional funding from Imperial College London to TC.

References

  • Alberts B., Johnson A., Lewis J., Morgan D., Raff M., Roberts K., et al. (2014). Molecular Biology of the Cell. New York, NY; Abingdon: Garland Science. [Google Scholar]
  • Althoff T., Mills D. J., Popot J. L., Kühlbrandt W. (2011). Arrangement of electron transport chain components in bovine mitochondrial supercomplex I1III2IV1. EMBO J. 30, 4652–4664. 10.1038/emboj.2011.324 [PMC free article] [PubMed] [CrossRef] [Google Scholar]
  • Arnold S. A., Albiez S., Bieri A., Syntychaki A., Adaixo R., McLeod R. A., et al.. (2017). Blotting-free and lossless cryo-electron microscopy grid preparation from nanoliter-sized protein samples and single-cell extracts. J. Struct. Biol. 197, 220–226. 10.1016/j.jsb.2016.11.002 [PubMed] [CrossRef] [Google Scholar]
  • Ashtiani D., Venugopal H., Belousoff M., Spicer B., Mak J., Neild A., et al.. (2018). Delivery of femtolitre droplets using surface acoustic wave based atomisation for cryo-EM grid preparation. J. Struct. Biol. 203, 94–101. 10.1016/j.jsb.2018.03.012 [PubMed] [CrossRef] [Google Scholar]
  • Bai X. C., Yan C., Yang G., Lu P., Ma D., Sun L., et al.. (2015). An atomic structure of human γ-secretase. Nature 525, 212–217. 10.1038/nature14892 [PMC free article] [PubMed] [CrossRef] [Google Scholar]
  • Bammes B. E., Rochat R. H., Jakana J., Chen D. H., Chiu W. (2012). Direct electron detection yields cryo-EM reconstructions at resolutions beyond 3/4 Nyquist frequency. J. Struct. Biol. 177, 589–601. 10.1016/j.jsb.2012.01.008 [PMC free article] [PubMed] [CrossRef] [Google Scholar]
  • Bayburt T. H., Grinkova Y. V., Sligar S. G. (2002). Self-assembly of discoidal phospholipid bilayer nanoparticles with membrane scaffold proteins. Nano Lett. 2, 853–856. 10.1021/nl025623k [CrossRef] [Google Scholar]
  • Bernal R. A., Stock D. (2004). Three-dimensional structure of the intact Thermus thermophilus H +-ATPase/synthase by electron microscopy. Structure 12, 1789–1798. 10.1016/j.str.2004.07.017 [PubMed] [CrossRef] [Google Scholar]
  • Bokori-Brown M., Martin T. G., Naylor C. E., Basak A. K., Titball R. W., Savva C. G. (2016). Cryo-EM structure of lysenin pore elucidates membrane insertion by an aerolysin family protein. Nat. Commun. 7:11293. 10.1038/ncomms11293 [PMC free article] [PubMed] [CrossRef] [Google Scholar]
  • Boland A., Martin T. G., Zhang Z., Yang J., Bai X. C., Chang L., et al.. (2017). Cryo-EM structure of a metazoan separase-securin complex at near-atomic resolution. Nat. Struct. Mol. Biol. 24, 414–418. 10.1038/nsmb.3386 [PMC free article] [PubMed] [CrossRef] [Google Scholar]
  • Booy F. P., Pawley J. B. (1993). Cryo-Crinkling - what happens to carbon-films on copper grids at low-temperature. Ultramicroscopy 48, 273–280. 10.1016/0304-3991(93)90101-3 [PubMed] [CrossRef] [Google Scholar]
  • Brilot A. F., Chen J. Z., Cheng A., Pan J., Harrison S. C., Potter C. S., et al.. (2012). Beam-induced motion of vitrified specimen on holey carbon film. J. Struct. Biol. 177, 630–637. 10.1016/j.jsb.2012.02.003 [PMC free article] [PubMed] [CrossRef] [Google Scholar]
  • Burgess S. A., Walker M. L., Thirumurugan K., Trinick J., Knight P. J. (2004). Use of negative stain and single-particle image processing to explore dynamic properties of flexible macromolecules. J. Struct. Biol. 147, 247–258. 10.1016/j.jsb.2004.04.004 [PubMed] [CrossRef] [Google Scholar]
  • Chen J. H., Jang C., Adam S., Fuhrer M. S., Williams E. D., Ishigami M. (2008). Charged-impurity scattering in graphene. Nat. Phys. 4, 377–381. 10.1038/nphys935 [CrossRef] [Google Scholar]
  • Cheng Y., Glaeser R. M., Nogales E. (2017). How cryo-EM became so hot. Cell 171, 1229–1231. 10.1016/j.cell.2017.11.016 [PMC free article] [PubMed] [CrossRef] [Google Scholar]
  • Denisov I. G., Sligar S. G. (2016). Nanodiscs for structural and functional studies of membrane proteins. Nat. Struct. Mol. Biol. 23, 481–486. 10.1038/nsmb.3195 [PMC free article] [PubMed] [CrossRef] [Google Scholar]
  • Denisov I. G., Sligar S. G. (2017). Nanodiscs in membrane biochemistry and biophysics. Chem. Rev. 117, 4669–4713. 10.1021/acs.chemrev.6b00690 [PMC free article] [PubMed] [CrossRef] [Google Scholar]
  • Dörr J. M., Koorengevel M. C., Schäfer M., Prokofyev A. V., Scheidelaar S., van der Cruijsen E. A. W., et al.. (2014). Detergent-free isolation, characterization, and functional reconstitution of a tetrameric K + channel: the power of native nanodiscs. Proc. Natl. Acad. Sci. U.S.A. 111, 18607–18612. 10.1073/pnas.1416205112 [PMC free article] [PubMed] [CrossRef] [Google Scholar]
  • Dörr J. M., Scheidelaar S., Koorengevel M. C., Dominguez J. J., Schäfer M., van Walree C. A., et al.. (2016). The styrene–maleic acid copolymer: a versatile tool in membrane research. Eur. Biophys. J. 45, 3–21. 10.1007/s00249-015-1093-y [PMC free article] [PubMed] [CrossRef] [Google Scholar]
  • Dürr U. H. N., Gildenberg M., Ramamoorthy A. (2012). The magic of bicelles lights up membrane protein structure. Chem. Rev. 112, 6054–6074. 10.1021/cr300061w [PMC free article] [PubMed] [CrossRef] [Google Scholar]
  • Earl L. A., Falconieri V., Milne J. L., Subramaniam S. (2017). Cryo-EM: beyond the microscope. Curr. Opin. Struct. Biol. 46, 71–78. 10.1016/j.sbi.2017.06.002 [PMC free article] [PubMed] [CrossRef] [Google Scholar]
  • Efremov R. G., Leitner A., Aebersold R., Raunser S. (2015). Architecture and conformational switch mechanism of the ryanodine receptor. Nature 517, 39–43. 10.1038/nature13916 [PubMed] [CrossRef] [Google Scholar]
  • Feng X., Fu Z., Kaledhonkar S., Jia Y., Shah B., Jin A., et al.. (2017). A fast and effective microfluidic spraying-plunging method for high-resolution single-particle Cryo-EM. Structure 25, 663.e3–670.e3. 10.1016/j.str.2017.02.005 [PMC free article] [PubMed] [CrossRef] [Google Scholar]
  • Fernandez-Leiro R., Conrad J., Scheres S. H. W., Lamers M. H. (2015). Cryo-EM structures of the E. Coli replicative DNA polymerase reveal its dynamic interactions with the DNA sliding clamp, exonuclease and τ. Elife 4:e11134. 10.7554/eLife.11134 [PMC free article] [PubMed] [CrossRef] [Google Scholar]
  • Flötenmeyer M., Weiss H., Tribet C., Popot J. L., Leonard K. (2007). The use of amphipathic polymers for cryo electron microscopy of NADH:ubiquinone oxidoreductase (complex I). J. Microsc. 227, 229–235. 10.1111/j.1365-2818.2007.01805.x [PubMed] [CrossRef] [Google Scholar]
  • Fujiyoshi Y. (1998). The structural study of membrane proteins by electron crystallography. Adv. Biophys. 35, 25–80. 10.1016/S0065-227X(98)80003-8 [PubMed] [CrossRef] [Google Scholar]
  • Gao Y., Cao E., Julius D., Cheng Y. (2016). TRPV1 structures in nanodiscs reveal mechanisms of ligand and lipid action. Nature 534, 347–351. 10.1038/nature17964 [PMC free article] [PubMed] [CrossRef] [Google Scholar]
  • Gatsogiannis C., Merino F., Prumbaum D., Roderer D., Leidreiter F., Meusch D., et al.. (2016). Membrane insertion of a Tc toxin in near-atomic detail. Nat. Struct. Mol. Biol. 23, 884–890. 10.1038/nsmb.3281 [PubMed] [CrossRef] [Google Scholar]
  • Glaeser R. M. (1992). Specimen flatness of thin crystalline arrays: influence of the substrate. Ultramicroscopy 46, 33–43. 10.1016/0304-3991(92)90006-6 [PubMed] [CrossRef] [Google Scholar]
  • Glaeser R. M., Han B.-G. (2017). Opinion: hazards faced by macromolecules when confined to thin aqueous films. Biophys. Rep. 3, 1–7. 10.1007/s41048-016-0026-3 [PMC free article] [PubMed] [CrossRef] [Google Scholar]
  • Glaeser R. M., McMullan G., Faruqi A. R., Henderson R. (2011). Images of paraffin monolayer crystals with perfect contrast: minimization of beam-induced specimen motion. Ultramicroscopy 111, 90–100. 10.1016/j.ultramic.2010.10.010 [PMC free article] [PubMed] [CrossRef] [Google Scholar]
  • Heersche H. B., Jarillo-Herrero P., Oostinga J. B., Vandersypen L. M. K., Morpurgo A. F. (2007). Bipolar supercurrent in graphene. Nature 446, 56–59. 10.1038/nature05555 [PubMed] [CrossRef] [Google Scholar]
  • Jain T., Sheehan P., Crum J., Carragher B., Potter C. S. (2012). Spotiton: a prototype for an integrated inkjet dispense and vitrification system for cryo-TEM. J. Struct. Biol. 179, 68–75. 10.1016/j.jsb.2012.04.020 [PMC free article] [PubMed] [CrossRef] [Google Scholar]
  • Jensen K. H., Brandt S. S., Shigematsu H., Sigworth F. J. (2016). Statistical modeling and removal of lipid membrane projections for cryo-EM structure determination of reconstituted membrane proteins. J. Struct. Biol. 194, 49–60. 10.1016/j.jsb.2016.01.012 [PMC free article] [PubMed] [CrossRef] [Google Scholar]
  • Kastner B., Fischer N., Golas M. M., Sander B., Dube P., Boehringer D., et al.. (2008). GraFix: sample preparation for single-particle electron cryomicroscopy. Nat. Methods 5, 53–55. 10.1038/nmeth1139 [PubMed] [CrossRef] [Google Scholar]
  • Kedrov A., Wickles S., Crevenna A. H., van der Sluis E. O., Buschauer R., Berninghausen O., et al.. (2016). Structural dynamics of the YidC:ribosome complex during membrane protein biogenesis. Cell Rep. 17, 2943–2954. 10.1016/j.celrep.2016.11.059 [PMC free article] [PubMed] [CrossRef] [Google Scholar]
  • Kelly D. F., Dukovski D., Walz T. (2008). Monolayer purification: a rapid method for isolating protein complexes for single-particle electron microscopy. Proc. Natl. Acad. Sci. U.S.A. 105, 4703–4708. 10.1073/pnas.0800867105 [PMC free article] [PubMed] [CrossRef] [Google Scholar]
  • Knispel R. W., Kofler C., Boicu M., Baumeister W., Nickell S. (2012). Blotting protein complexes from native gels to electron microscopy grids. Nat. Methods 9, 182–184. 10.1038/nmeth.1840 [PubMed] [CrossRef] [Google Scholar]
  • Krogh A., Larsson B., Von Heijne G., Sonnhammer E. L. L. (2001). Predicting transmembrane protein topology with a hidden Markov model: application to complete genomes. J. Mol. Biol. 305, 567–580. 10.1006/jmbi.2000.4315 [PubMed] [CrossRef] [Google Scholar]
  • Kudryashev M., Castaño-Díez D., Deluz C., Hassaine G., Grasso L., Graf-Meyer A., et al.. (2016). The structure of the mouse serotonin 5-HT3receptor in lipid vesicles. Structure 24, 165–170. 10.1016/j.str.2015.11.004 [PubMed] [CrossRef] [Google Scholar]
  • Larson D. M., Downing K. H., Glaeser R. M. (2011). The surface of evaporated carbon films is an insulating, high-bandgap material. J. Struct. Biol. 174, 420–423. 10.1016/j.jsb.2011.02.005 [PMC free article] [PubMed] [CrossRef] [Google Scholar]
  • Lee C., Wei X., Kysar J. W., Hone J. (2008). Measurement of the elastic properties and intrinsic strength of monolayer graphene. Science 321, 385–388. 10.1126/science.1157996 [PubMed] [CrossRef] [Google Scholar]
  • Lee S. C., Knowles T. J., Postis V. L. G., Jamshad M., Parslow R. A., Lin Y. P., et al.. (2016). A method for detergent-free isolation of membrane proteins in their local lipid environment. Nat. Protoc. 11, 1149–1162. 10.1038/nprot.2016.070 [PubMed] [CrossRef] [Google Scholar]
  • Li X., Cai W., An J., Kim S., Nah J., Yang D., et al.. (2009). Large-area synthesis of high-quality and uniform graphene films on copper foils. Science 324, 1312–1314. 10.1126/science.1171245 [PubMed] [CrossRef] [Google Scholar]
  • Li X., Mooney P., Zheng S., Booth C. R., Braunfeld M. B., Gubbens S., et al.. (2013). Electron counting and beam-induced motion correction enable near-atomic-resolution single-particle cryo-EM. Nat. Methods 10, 584–590. 10.1038/nmeth.2472 [PMC free article] [PubMed] [CrossRef] [Google Scholar]
  • Llaguno M. C., Xu H., Shi L., Huang N., Zhang H., Liu Q., et al.. (2014). Chemically functionalized carbon films for single molecule imaging. J. Struct. Biol. 185, 405–417. 10.1016/j.jsb.2014.01.006 [PMC free article] [PubMed] [CrossRef] [Google Scholar]
  • Long A. R., O'Brien C. C., Malhotra K., Schwall C. T., Albert A. D., Watts A., et al.. (2013). A detergent-free strategy for the reconstitution of active enzyme complexes from native biological membranes into nanoscale discs. BMC Biotechnol. 13:41. 10.1186/1472-6750-13-41 [PMC free article] [PubMed] [CrossRef] [Google Scholar]
  • Lyumkis D., Julien J. P., De Val N., Cupo A., Potter C. S., Klasse P. J., et al.. (2013). Cryo-EM structure of a fully glycosylated soluble cleaved HIV-1 envelope trimer. Science 342, 1484–1490. 10.1126/science.1245627 [PMC free article] [PubMed] [CrossRef] [Google Scholar]
  • Martin T. G., Bharat T. A. M., Joerger A. C., Bai X., Praetorius F., Fersht A. R., et al.. (2016a). Design of a molecular support for cryo-EM structure determination. Proc. Natl. Acad. Sci. U.S.A. 113, E7456–E7463. 10.1073/pnas.1612720113 [PMC free article] [PubMed] [CrossRef] [Google Scholar]
  • Martin T. G., Boland A. W. P., Fitzpatrick A., Scheres S. H. W. (2016b). Graphene oxide grid preparation. 10.6084/m9.figshare.3178669.v1. [CrossRef] [Google Scholar]
  • Mazhab-Jafari M. T., Rohou A., Schmidt C., Bueler S. A., Benlekbir S., Robinson C. V., et al.. (2016). Atomic model for the membrane-embedded VO motor of a eukaryotic V-ATPase. Nature 539, 118–122. 10.1038/nature19828 [PMC free article] [PubMed] [CrossRef] [Google Scholar]
  • Meyer J. C., Geim A. K., Katsnelson M. I., Novoselov K. S., Booth T. J., Roth S. (2007). The structure of suspended graphene sheets. Nature 446, 60–63. 10.1038/nature05545 [PubMed] [CrossRef] [Google Scholar]
  • Meyerson J. R., Rao P., Kumar J., Chittori S., Banerjee S., Pierson J., et al.. (2014). Self-assembled monolayers improve protein distribution on holey carbon cryo-EM supports. Sci. Rep. 4:7084. 10.1038/srep07084 [PMC free article] [PubMed] [CrossRef] [Google Scholar]
  • Milazzo A. C., Cheng A., Moeller A., Lyumkis D., Jacovetty E., Polukas J., et al.. (2011). Initial evaluation of a direct detection device detector for single particle cryo-electron microscopy. J. Struct. Biol. 176, 404–408. 10.1016/j.jsb.2011.09.002 [PMC free article] [PubMed] [CrossRef] [Google Scholar]
  • Miyazawa A., Fujiyoshi Y., Stowell M., Unwin N. (1999). Nicotinic acetylcholine receptor at 4.6 Å resolution: transverse tunnels in the channel wall. J. Mol. Biol. 288, 765–786. 10.1006/jmbi.1999.2721 [PubMed] [CrossRef] [Google Scholar]
  • Naydenova K., Russo C. J. (2017). Measuring the effects of particle orientation to improve the efficiency of electron cryomicroscopy. Nat. Commun. 8:629. 10.1038/s41467-017-00782-3 [PMC free article] [PubMed] [CrossRef] [Google Scholar]
  • Noble A. J., Wei H., Dandey V. P., Zhang Z., Potter C. S., Electron S., et al. (2018). Reducing effects of particle adsorption to the air-water interface in cryoEM. bioRxiv 288340. 10.1101/288340 [CrossRef] [Google Scholar]
  • Orwick M. C., Judge P. J., Procek J., Lindholm L., Graziadei A., Engel A., et al.. (2012). Detergent-free formation and physicochemical characterization of nanosized lipid-polymer complexes: lipodisq. Angew. Chem. Int. Ed. Engl. 51, 4653–4657. 10.1002/anie.201201355 [PubMed] [CrossRef] [Google Scholar]
  • Pantelic R. S., Meyer J. C., Kaiser U., Baumeister W., Plitzko J. M. (2010). Graphene oxide: a substrate for optimizing preparations of frozen-hydrated samples. J. Struct. Biol. 170, 152–156. 10.1016/j.jsb.2009.12.020 [PubMed] [CrossRef] [Google Scholar]
  • Pantelic R. S., Suk J. W., Magnuson C. W., Meyer J. C., Wachsmuth P., Kaiser U., et al.. (2011). Graphene: substrate preparation and introduction. J. Struct. Biol. 174, 234–238. 10.1016/j.jsb.2010.10.002 [PubMed] [CrossRef] [Google Scholar]
  • Parmar M., Rawson S., Scarff C. A., Goldman A., Dafforn T. R., Muench S. P., et al.. (2018). Using a SMALP platform to determine a sub-nm single particle cryo-EM membrane protein structure. Biochim. Biophys. Acta 1860, 378–383. 10.1016/j.bbamem.2017.10.005 [PMC free article] [PubMed] [CrossRef] [Google Scholar]
  • Passmore L. A., Russo C. J. (2016). Specimen preparation for high-resolution cryo-EM. Meth. Enzymol. 579, 51–86. 10.1016/bs.mie.2016.04.011 [PMC free article] [PubMed] [CrossRef] [Google Scholar]
  • Paulsen C. E., Armache J. P., Gao Y., Cheng Y., Julius D. (2015). Structure of the TRPA1 ion channel suggests regulatory mechanisms. Nature 520, 511–517. 10.1038/nature14367 [PMC free article] [PubMed] [CrossRef] [Google Scholar]
  • Popot J.-L., Althoff T., Bagnard D., Banères J.-L., Bazzacco P., Billon-Denis E., et al.. (2011). Amphipols From A to Z* . Annu. Rev. Biophys. 40, 379–408. 10.1146/annurev-biophys-042910-155219 [PubMed] [CrossRef] [Google Scholar]
  • Postis V., Rawson S., Mitchell J. K., Lee S. C., Parslow R. A., Dafforn T. R., et al.. (2015). The use of SMALPs as a novel membrane protein scaffold for structure study by negative stain electron microscopy. Biochim. Biophys. Acta - Biomembr. 1848, 496–501. 10.1016/j.bbamem.2014.10.018 [PMC free article] [PubMed] [CrossRef] [Google Scholar]
  • Privé G. G. (2007). Detergents for the stabilization and crystallization of membrane proteins. Methods 41, 388–397. 10.1016/j.ymeth.2007.01.007 [PubMed] [CrossRef] [Google Scholar]
  • Razinkov I., Dandey V. P., Wei H., Zhang Z., Melnekoff D., Rice W. J., et al.. (2016). A new method for vitrifying samples for cryoEM. J. Struct. Biol. 195, 190–198. 10.1016/j.jsb.2016.06.001 [PMC free article] [PubMed] [CrossRef] [Google Scholar]
  • Regan W., Alem N., Alemán B., Geng B., Girit Ç., Maserati L., et al. (2010). A direct transfer of layer-area graphene. Appl. Phys. Lett. 96:113102 10.1063/1.3337091 [CrossRef] [Google Scholar]
  • Rhinow D., Kühlbrandt W. (2008). Electron cryo-microscopy of biological specimens on conductive titanium-silicon metal glass films. Ultramicroscopy 108, 698–705. 10.1016/j.ultramic.2007.11.005 [PubMed] [CrossRef] [Google Scholar]
  • Rigaud J. L., Lévy D. (2003). Reconstiution of membrane proteins into liposomes. Meth. Enzymol. 372, 65–86. 10.1016/S0076-6879(03)72004-7 [PubMed] [CrossRef] [Google Scholar]
  • Russo C. J., Henderson R. (2018). Charge accumulation in electron cryomicroscopy. Ultramicroscopy 187, 43–49. 10.1016/j.ultramic.2018.01.009 [PMC free article] [PubMed] [CrossRef] [Google Scholar]
  • Russo C. J., Passmore L. A. (2014a). Controlling protein adsorption on graphene for cryo-EM using low-energy hydrogen plasmas. Nat. Methods 11, 649–652. 10.1038/nmeth.2931 [PMC free article] [PubMed] [CrossRef] [Google Scholar]
  • Russo C. J., Passmore L. A. (2014b). Ultrastable gold substrates for electron cryomicroscopy. Science 346, 1377–1380. 10.1126/science.1259530 [PMC free article] [PubMed] [CrossRef] [Google Scholar]
  • Russo C. J., Passmore L. A. (2016a). Progress towards an optimal specimen support for electron cryomicroscopy. Curr. Opin. Struct. Biol. 37, 81–89. 10.1016/j.sbi.2015.12.007 [PMC free article] [PubMed] [CrossRef] [Google Scholar]
  • Russo C. J., Passmore L. A. (2016b). Ultrastable gold substrates: properties of a support for high-resolution electron cryomicroscopy of biological specimens. J. Struct. Biol. 193, 33–44. 10.1016/j.jsb.2015.11.006 [PMC free article] [PubMed] [CrossRef] [Google Scholar]
  • Saliba A. E., Vonkova I., Gavin A. C. (2015). The systematic analysis of protein–lipid interactions comes of age. Nat. Rev. Mol. Cell Biol. 16, 753–761. 10.1038/nrm4080 [PubMed] [CrossRef] [Google Scholar]
  • Seddon A. M., Curnow P., Booth P. J. (2004). Membrane proteins, lipids and detergents: not just a soap opera. Biochim. Biophys. Acta - Biomembr. 1666, 105–117. 10.1016/j.bbamem.2004.04.011 [PubMed] [CrossRef] [Google Scholar]
  • Shen P. S., Yang X., DeCaen P. G., Liu X., Bulkley D., Clapham D. E., et al.. (2016). The structure of the polycystic kidney disease channel PKD2 in lipid nanodiscs. Cell 167, 763.e11–773.e11. 10.1016/j.cell.2016.09.048 [PMC free article] [PubMed] [CrossRef] [Google Scholar]
  • Tan Y. Z., Baldwin P. R., Davis J. H., Williamson J. R., Potter C. S., Carragher B., et al.. (2017). Addressing preferred specimen orientation in single-particle cryo-EMthrough tilting. Nat. Methods 14, 793–796. 10.1038/nmeth.4347 [PMC free article] [PubMed] [CrossRef] [Google Scholar]
  • Tilley S. J., Orlova E. V., Gilbert R. J. C., Andrew P. W., Saibil H. R. (2005). Structural basis of pore formation by the bacterial toxin pneumolysin. Cell 121, 247–256. 10.1016/j.cell.2005.02.033 [PubMed] [CrossRef] [Google Scholar]
  • Typke D., Downing K. H., Glaeser R. M. (2004). Electron microscopy of biological macromolecules: bridging the gap between what physics allows and what we currently can get. Microsc. Microanal. 10, 21–27. 10.1017/S1431927604040164 [PubMed] [CrossRef] [Google Scholar]
  • Vinothkumar K. R., Henderson R. (2016). Single particle electron cryomicroscopy: trends, issues and future perspective. Q. Rev. Biophys. 49:e13. 10.1017/S0033583516000068 [PubMed] [CrossRef] [Google Scholar]
  • Vonck J. (2000). Parameters affecting specimen flatness of two-dimensional crystals for electron crystallography. Ultramicroscopy 85, 123–129. 10.1016/S0304-3991(00)00052-8 [PubMed] [CrossRef] [Google Scholar]
  • Wallin E., Heijne G. V. (1998). Genome-wide analysis of integral membrane proteins from eubacterial, archaean, and eukaryotic organisms. Protein Sci. 7, 1029–1038. 10.1002/pro.5560070420 [PMC free article] [PubMed] [CrossRef] [Google Scholar]
  • Wang G., Shen X., Wang B., Yao J., Park J. (2009). Synthesis and characterisation of hydrophilic and organophilic graphene nanosheets. Carbon N. Y. 47, 1359–1364. 10.1016/j.carbon.2009.01.027 [CrossRef] [Google Scholar]
  • Wang L., Sigworth F. J. (2009). Structure of the BK potassium channel in a lipid membrane from electron cryomicroscopy. Nature 461, 292–295. 10.1038/nature08291 [PMC free article] [PubMed] [CrossRef] [Google Scholar]
  • Warschawski D. E., Arnold A. A., Beaugrand M., Gravel A., Chartrand É., Marcotte I. (2011). Choosing membrane mimetics for NMR structural studies of transmembrane proteins. Biochim. Biophys. Acta - Biomembr. 1808, 1957–1974. 10.1016/j.bbamem.2011.03.016 [PubMed] [CrossRef] [Google Scholar]
  • Wilkes M., Madej M. G., Kreuter L., Rhinow D., Heinz V., De Sanctis S., et al.. (2017). Molecular insights into lipid-assisted Ca2+ regulation of the TRP channel Polycystin-2. Nat. Struct. Mol. Biol. 24, 123–130. 10.1038/nsmb.3357 [PubMed] [CrossRef] [Google Scholar]
  • Yoshioka C., Carragher B., Potter C. S. (2010). CryomeshTM: a new substrate for cryo-electron microscopy. Microsc. Microanal. 16, 43–53. 10.1017/S1431927609991310 [PMC free article] [PubMed] [CrossRef] [Google Scholar]
  • Zheng S. Q., Palovcak E., Armache J. P., Verba K. A., Cheng Y., Agard D. A. (2017). MotionCor2: anisotropic correction of beam-induced motion for improved cryo-electron microscopy. Nat. Methods 14, 331–332. 10.1038/nmeth.4193 [PMC free article] [PubMed] [CrossRef] [Google Scholar]
  • Zhou H. X., Cross T. A. (2013). Influences of membrane mimetic environments on membrane protein structures. Annu. Rev. Biophys. 42, 361–392. 10.1146/annurev-biophys-083012-130326 [PMC free article] [PubMed] [CrossRef] [Google Scholar]

Articles from Frontiers in Molecular Biosciences are provided here courtesy of Frontiers Media SA

wildmanduct1950.blogspot.com

Source: https://www.ncbi.nlm.nih.gov/pmc/articles/PMC6090150/

0 Response to "Preparation of the Continuous Carbon Grid for Cryo em"

Post a Comment

Subscribe to: Post Comments (Atom)

Iklan Atas Artikel

Iklan Tengah Artikel 1

Iklan Tengah Artikel 2

Iklan Bawah Artikel